In Ultiboard how do I change the width of each separate segment of a net?
Hardware: PXI/CompactPCI>>Controllers
Problem: In Ultiboard how do I change the width of each separate segment of a net?
Solution: Once a copper trace has been placed you can specify the width of each individual segment. To do this:
- In the Select toolbox deselect all icons except the Enable Selecting Traces icon (second from the left). If you cannot see this toolbox you can select it by going to View >> Toolbars >> Select
- In the Ultiboard work-area double-click on a segment of a trace
- In the Track Properties dialog box select the General tab
- In the Measurements area select the Width field.
- Enter the required width of that segment of the net
- Click on the Apply button
- Click on the OK button
The above steps can be repeated for each individual segment of the net/trace.
Related Links:
Attachments:
Report Date: 10/11/2006
Last Updated: 03/23/2009
Document ID: 42ADNUDK