1 ratings:

3 out of 5

Rate this Document

Start and Stop Condition on Different Data Channels using DASYLab

Primary Software: Other NI Software>>DASYLab
Primary Software Version: 8.0
Primary Software Fixed Version: N/A
Secondary Software: N/A

Problem: How is it possible for DASYLab to control a relay depending on two different signals for start and stop?

Solution: The Combi Trigger is available in two versions: Start and Stop on One Channel and Start and Stop on Two Channels. Use the second version if you need to control a Relay with two independent data channels. The trigger has two inputs for every output: the input with the lower number is to monitor the start condition and the input with the higher number is for monitoring the stop condition.

Related Links: DASYLab Support Page
KnowledgeBase 318FDT2G. Using Triggers and Relays in DASYLab.

Attachments:





Report Date: 05/06/2002
Last Updated: 09/15/2004
Document ID: 2L5CDI0Z

Your Feedback!	Poor  |  Excellent							Yes	No
Document Quality?							Answered Your Question?
	1	2	3	4	5
Document needs work? Please tell us why.
Please Contact NI for all product and support inquiries.