How Do I Simulate a NI-Scope Device in LabVIEW?
Primary Software Version: 3.1
Primary Software Fixed Version: N/A
Secondary Software: N/A
Hardware: Modular Instruments>>High-Speed Digitizers (Scopes)
I would like to program using the NI-SCOPE driver but do not yet have the hardware. How can I simulate the device so that I can test my programming?
The NI-SCOPE driver allows you to simulate a device so that you can run your application without the hardware present. A static sine wave can be generated from a generic device.
For NI-SCOPE 3.1 and later you can simulate a device in MAX by right-clicking on NI-DAQmx Devices and selecting Create New NI-DAQmx Device...»NI-DAQmx Simulated Device. If you are using NI-SCOPE 3.0 and earlier, or would like to simulate a legacy device such as the NI 5102, 5112, or 5911, please follow the steps below.
Products & Services: NI High-Speed Digitizers Home
Product Manuals: NI High-Speed Digitizers Help
Drivers and Updates: NI-Scope 15.1.1 - Windows 8/Windows 7/Vista x64/Vista x86/XP
Report Date: 01/31/2006
Last Updated: 05/04/2016
Document ID: 3TUECLQ4