FieldPoint Interface for LabVIEWPrimary Software: Driver Software>>NI-FieldPointPrimary Software Version: 6.0.1 Primary Software Fixed Version: N/A Secondary Software: LabVIEW Development Systems>>LabVIEW Professional Development System
Problem: What is the FieldPoint LabVIEW Interface shown in Measurement & Automation Explorer?  Solution: The FieldPoint Interface for LabVIEW is version of the FPLVMgr.dll installed to the newest version of LabVIEW development environment. The DLL is located labview x.x\vi.lib\FieldPoint\SubVIs where x.x is the version of LabVIEW. When running the NI-FieldPoint installer, FieldPoint support is selectable for all detected versions of LabVIEW development environment. Any versions of LabVIEW Run-time would need to be manually selected.  For example, if NI-FieldPoint 6.0.1 installed support for all versions of LabVIEW seen above, only FPLVMgr.dll 6.0.0.3003 in labview 8.5\vi.lib\FieldPoint\SubVIs is shown in MAX, while labview 7.1\vi.lib\FieldPoint\SubVIs contains version 5.0.1.2010 of FPLVMgr.dll.
If, however, LabVIEW 8.5 Run-Time is installed and LabVIEW 7.1 development environment is installed, MAX will display FPLVMgr.dll version 5.0.1.2010. Related Links: KnowledgeBase 28Q92ALS: Installation of FieldPoint VIs in LabVIEW Attachments:
Report Date: 03/21/2008 Last Updated: 03/24/2008 Document ID: 4JKD56CY |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
