Default Setup Changes In The IVI Configuration Utility In MAX 3.0 Primary Software: Instrument Drivers/IVI>>IVI Driver TemplatesPrimary Software Version: 2.0 Primary Software Fixed Version: N/A Secondary Software: Other NI Software, Driver Software
Problem: I used to be able to specify the default setup data for my IVI driver in the Measurement and Automation Explorer (MAX). After installing MAX 3.0 and IVI Compliance Package from the Driver CD, I no longer have this option. Solution: In MAX 3.0, there are no longer any Default Setup data available for drivers. This data has been replaced by Configurable Initial Settings, which the driver developer publishes. The use of Configurable Initial Settings is more restrictive than the Default Setup. The set of attributes available to your driver sessions in the Configurable Initial Settings is restricted to what is published by the driver developer in the software module entry for that driver. You can edit the value of these attributes for you driver session but you cannot add additional attributes to this list of Configurable Initial Settings. If you need attributes that are not available in the Configurable Initial Settings list, National Instruments recommends you contact the specific driver supplier. Related Links: KnowledgeBase 3GJATSBJ: IVI Configurable Initial Settings Attachments:
Report Date: 04/30/2003 Last Updated: 10/17/2007 Document ID: 2WTBS2BJ |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
