Required Software for NI-987x Module for cRIO Hardware: CompactRIO
Problem: What software do I need for using an NI-987x module in a cRIO? Solution: To use an NI-987x module in a cRIO you need the following software versions installed in the following order on your Windows Development PC: 1. LabVIEW 8.5 or later
2. LabVIEW Real-Time Module 8.5 or later
3. LabVIEW FPGA Module 8.5 or later
4. NI-RIO 2.4 or later
5. NI-Serial - Windows Vista x64/2000/Vista x86/XP - NI-987x Module (8.5, 8.5.1 only. See below)
It is important to note that the NI-Serial - Windows Vista x64/2000/Vista x86/XP - NI-987x Module is only needed separately if using LabVIEW 8.5.x with NI-RIO 2.4.x. All versions after LabVIEW 8.5.x (NI-RIO 2.4.x) will obtain support for the NI-987x modules from the NI-RIO driver. Information regarding what software is required for any NI-RIO device can be found in the related links section. Related Links: Drivers and Updates: NI-Serial - Windows Vista x64/2000/Vista x86/XP - NI-987x Module Drivers and Updates: NI-RIO (Generic link to all versions) Developer Zone Tutorial: Software Support for CompactRIO, CompactDAQ, Single-Board RIO and R Series devices Attachments:
Report Date: 05/29/2008 Last Updated: 09/04/2008 Document ID: 4LSATL4H |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
