NI-IMAQ, NI-IMAQdx, and NI-IMAQ I/O Compatibility with Different LabVIEW VersionsPrimary Software: Driver Software>>NI-IMAQPrimary Software Version: 3.5.1 Primary Software Fixed Version: N/A Secondary Software: LabVIEW Development Systems>>LabVIEW Full Development System
Problem: I need to know which version of the NI-IMAQ, NI-IMAQdx, and NI-IMAQ I/O drivers will install support for which LabVIEW versions. Where can I find this information? Solution: The chart below shows compatible versions of LabVIEW and the various image acquisition drivers versions. Note: Versions 3.5.1 and later of the NI-IMAQ drivers, versions 3.0 and later of the NI-IMAQdx drivers, and all versions of NI-IMAQ I/O come bundled with the Vision Aquisiton Software. The driver versions installed can be found in Measurement & Automation Explorer (MAX) by expanding the Software category under My System. For Legacy 1394 support with LabVIEW 2009 refer to KnowledgeBase 4YEAFO0J: Where is the Legacy 1394 Support After Installing Vision Acquisition Software 2009. Related Links: Drivers and Updates: NI Vision Acquisition Software KnowledgeBase 4AKC22MJ: Compatible Versions of Vision Development Module with LabVIEW and LabWindows/CVI KnowledgeBase 4YEAFO0J: Where is the Legacy 1394 Support After Installing Vision Acquisition Software 2009 Attachments:
Report Date: 06/23/2006 Last Updated: 01/20/2012 Document ID: 3YMCCQ0F |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
