What National Instruments Products Support VME64 Transfers?

Hardware: VXI/VME/MXI>>VME Controllers

Problem: I am using VME64 boards and I would like to use a National Instruments VME controller with these boards. What National Instruments Products Support VME64 Transfers?

Solution: VME64 is supported for the following drivers:

Hardware	Windows 3.1/DOS 2.0	Windows 95/NT
VXIpc-850	All Released Versions	All Released Versions
VXI-MXI-2	2.0 and later	All Released Versions

This list was created 5/7/96. Any versions of NI-VXI created after this date may not be reflected in this list. For the latest version of NI-VXI, please visit the VXI Support: Current NI-VXI Driver Versions page linked below.

In order to perform a VME64 transfer, the access privileges should be set as follows with VXImove:

Access Privilege 6: VME64 nonprivileged block access
Access Privilege 7: VME64 privileged block access

For more information on performing VME64 transfers with the NI-VXI API, please refer to the NI-VXI Programmer Reference Manual linked below. For information on performing VME64 transfers with the NI-VISA API, please review the KnowledgeBase article linked below.

Related Links: KnowledgeBase 24BDMR3Y: Does the NI-VISA API Support VME64 Transfers?
VXI Support: Current NI-VXI Driver Versions
Product Manuals: NI-VXI Programmer Reference Manual

Attachments:

Report Date: 05/02/1996
Last Updated: 05/13/2004
Document ID: 0L1DJLSR

Your Feedback!

Poor | Excellent

Yes

Document Quality?

Answered Your Question?

Please Contact NI for all product and support inquiries.