This Document is not yet Rated

Rate this Document

Digital Output Does Not Indicate Inspection Results from Vision Builder for Automated Inspection

Primary Software: Vision Builder for Automated Inspection
Primary Software Version: 1.0
Primary Software Fixed Version: N/A
Secondary Software:

Problem: I configured a virtual channel on my DAQ board and assigned it to output the inspection results from Vision Builder for Automated Inspection (VBAI). When I use the Test Digital Outputs utility I can toggle the line successfully but when I run my script the line state doesn't change, regardless of the inspection status.

Solution: Once you are done configuring the inspection, choose Switch To Inspection Interface from the File menu and the digital output will toggle as the items pass and fail. The line state will not change when the script is run in the Configuration Interface.

Related Links:

Attachments:





Report Date: 04/07/2003
Last Updated: 06/26/2003
Document ID: 2W6DS545

Your Feedback!	Poor  |  Excellent							Yes	No
Document Quality?							Answered Your Question?
	1	2	3	4	5
Document needs work? Please tell us why.
Please Contact NI for all product and support inquiries.