How do I install NI SoftMotion Development Module for LabVIEW 8?
Primary Software: LabVIEW Modules>>SoftMotion Development Module
Primary Software Version: 1.0
Primary Software Fixed Version: N/A
Secondary Software: N/A
Problem: I purchased the NI SoftMotion Development Module 1.0 and wish to use it in LabVIEW 8. The installer only has support for LabVIEW 7.1. Can I use the NI SoftMotion Development Module 1.0 in LabVIEW 8?
Solution: The NI SoftMotion Development Module 1.0 was built for LabVIEW 7.1, but can be used with LabVIEW 8 after performing the following steps:
- If the NI SoftMotion Development Module 1.0 is not installed, install it with LabVIEW 7.1 support.
- Copy the vi.lib files to LabVIEW 8.
- Copy the SoftMotion folder: C:\Program Files\National Instruments\LabVIEW 7.1\vi.lib\Motion\SoftMotion.
- Paste this folder in the Motion folder: C:\Program Files\National Instruments\LabVIEW 8.0\vi.lib\Motion.
- Copy the menu files to LabVIEW 8.
- Go to C:\Program Files\National Instruments\LabVIEW 7.1\menus\default\motion and copy the following files:
- motion4.mnu
- nisoftmotionsdk_contour.mnu
- nisoftmotionsdk_move.mnu
- nisoftmotionsdk_tg.mnu
- Paste these files in the C:\Program Files\National Instruments\LabVIEW 8.0\menus\default\motion folder.
Copy the shipping examples to LabVIEW 8.- Copy the SoftMotion folder: C:\Program Files\National Instruments\LabVIEW 7.1\examples\Motion\SoftMotion
- Paste this folder in the Motion folder: C:\Program Files\National Instruments\LabVIEW 8.0\examples\Motion\
Note:- Some of the LabVIEW 8 folders may not exist. If this is the case, you will need to create these folders.
- This process requires the installation of LabVIEW 7.1.x and LabVIEW 8.0.
Related Links:
Attachments:
Report Date: 09/28/2005
Last Updated: 10/19/2005
Document ID: 3PRH1MVB