Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI
This Document is not yet Rated  Rate this Document

Input or Output Bundlers Move out of Viewing Area using Statechart Module

Primary Software: LabVIEW Modules>>Statechart Module
Primary Software Version: 1.0
Primary Software Fixed Version: N/A
Secondary Software: N/A

Problem:
When using LabVIEW Statechart module, and configuring a state or transition, the input or output clusters are moved out of the viewing area (as seen below). Why does this happen?



Solution:
This is typically caused by having a structure (While loop, FOR loop, Case structure, etc.) in the configuration window (see Pic1.jpg), and then having this structure expand to push the input cluster (both inputs and outputs) out of the window (see Pic2.jpg). If the structure is expanded to the right, this can happen to the ouputs cluster on the right side of the configuration window. Pic3.jpg shows the result, where you cannot return them to their original location.
 
This can be fixed by:
  1. Copying the code in the configuration window (to a safe location).
  2. Deleting the code from the configuration window.
  3. Click OK to close the configuration window and save it with no code inside.
  4. Re-Open the configuration, and the input cluster will return to normal.
  5. Paste the code previously copied out of the window.
  6. Click OK to close the window.


Related Links:

Attachments:

Pic 1.JPG
Pic 2.JPG
Pic 3.JPG

Report Date: 03/20/2008
Last Updated: 04/24/2008
Document ID: 4JJFTCN5

Your Feedback! poor Poor  |  Excellent excellent   Yes No
 Document Quality? 
 Answered Your Question? 
  1 2 3 4 5
Please Contact NI for all product and support inquiries.submit