Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI
This Document is not yet Rated  Rate this Document

Digital Output on Motion Controller Not Functioning

Primary Software: Driver Software>>NI-Motion/FlexMotion
Primary Software Version: 7.0
Primary Software Fixed Version: 8.0
Secondary Software: N/A
Hardware: Motion Control

Problem:
I have a PCI-7350 and am trying to output signals on the DIO lines in Measurement & Automation Explorer (MAX) using Set I/O Port MOMO.flx. I can read the inputs on the first port, but line 5 on the second port and the entire third port never have an output. Why do my output ports not work?

Solution:
This behavior has been seen with older versions of the NI-Motion driver. Updating to NI-Motion 7.4 should resolve this behavior and include full functionality with all DIO ports on your motion controller.

Related Links:
Drivers and Updates: NI-Motion 7.4

Attachments:





Report Date: 11/21/2006
Last Updated: 04/22/2009
Document ID: 43KFPLGH

Your Feedback! poor Poor  |  Excellent excellent   Yes No
 Document Quality? 
 Answered Your Question? 
  1 2 3 4 5
Please Contact NI for all product and support inquiries.submit