This Document is not yet Rated

Rate this Document

Why Do I Get Error -50202?

Primary Software: Driver Software>>NI-DAQmx
Primary Software Version: N/A
Primary Software Fixed Version: N/A
Secondary Software: LabWindows/CVI Add-ons>>Real-Time Module

Problem:
I am using NI software and I get error -50202.  What is going on?

Solution:
Error -50202 is a very generic error that can occur in many different situations for many different reasons.  There are two cases we have identified specifically that cause the error:

• If you are using an E series or an M series Data Acquisition (DAQ) with a ASUS® P4S433 motherboard and BIOS version 1007, you will receive the error when trying to perform a self-test, reset the device, or open the test panels in Measurement & Automation Explorer (MAX).  In this particular case, all you have to do is upgrade the BIOS to ASUS BIOS 1010.  Refer to the ASUSTek Computer Inc. website for more information.
  
• This might be caused by an AMD multi-core/multi-processor issue.  If you are using a system with an AMD multi-core or multi-processor setup, please see KnowledgeBase 4BFBEIQA: AMD Multi-Core/CPU Systems Can Cause Unexpected Behavior in NI Driver Software.

Related Links:
ASUS BIOS 1010
KnowledgeBase 4BFBEIQA: AMD Multi-Core/CPU Systems Can Cause Unexpected Behavior in NI Driver Software

Attachments:





Report Date: 08/14/2007
Last Updated: 10/31/2008
Document ID: 4CDAP7QA

Your Feedback!	Poor  |  Excellent							Yes	No
Document Quality?							Answered Your Question?
	1	2	3	4	5
Document needs work? Please tell us why.
Please Contact NI for all product and support inquiries.