Why Do I Receive Internal Software Error -61499 When Compiling my FlexRIO FPGA VI for an NI 6587?
Primary Software: LabVIEW Modules>>LabVIEW FPGA Module
Primary Software Version: N/A
Primary Software Fixed Version: N/A
Secondary Software: Driver Software>>NI-RIO
Hardware: Reconfigurable I/O (RIO)
I am compiling an FPGA VI for a FlexRIO target with an NI 6587 FlexRIO Adapter Module. During placing and routing, I receive the following error:
When I click the Details button, I receive the following message:
How do I resolve this error?
The error is caused by in internal bug in the Xilinx ISE 12.4 compile tools used by LabVIEW 2011. The failure only occurs when using custom socketed Component-Level IP (CLIP) with global clock rates greater than 400MHz. The error will not occur when using the shipping CLIP for the NI 6587.
In order to work around the issue, you will need to use a global clock slower than 400MHz or compile the project using LabVIEW 2010, which uses the Xilinx ISE 11.5 compile tools.
KnowledgeBase 3WRFDHJ4: Error -61499 in LabVIEW FPGA
KnolwedgeBase 5FBCBNEQ: Error -61499 when Compiling an FPGA VI Using Hybrid Mode with CompactRIO
Report Date: 03/16/2012
Last Updated: 05/17/2017
Document ID: 5VFC1LZT