This Document is not yet Rated

Rate this Document

Why do I get Error -70006 When Trying to Use Breakpoints with Analog Feedback?

Primary Software: Driver Software>>NI-Motion/FlexMotion
Primary Software Version: 5.2
Primary Software Fixed Version: N/A
Secondary Software: N/A
Hardware: Motion Control>>Controllers>>PCI-7343, Motion Control>>Controllers>>FW-7344, Motion Control>>Controllers>>PCI-7334, Motion Control>>Controllers>>PXI-7334, Motion Control>>Controllers>>ENET-7344, Motion Control>>Controllers>>PCI-7344

Problem: The 7344/7334 currently support Breakpoints only with incremental or quadrature encoders. They do not support Breakpoints on an axis that is mapped to Analog feedback, such as a potentiometer. If you try to use them in this way, you will get:

Error # -70006 occurred at Configure Breakpoint (flex_configure_breakpoint)

Solution: Use an incremental encoder with the axis mapped to an encoder for feedback.

Related Links:

Attachments:





Report Date: 03/10/2003
Last Updated: 05/24/2004
Document ID: 2V985SZO

Your Feedback!	Poor  |  Excellent							Yes	No
Document Quality?							Answered Your Question?
	1	2	3	4	5
Document needs work? Please tell us why.
Please Contact NI for all product and support inquiries.