Using the BNC-2110 with 671x and 673x Analog Output Devices Primary Software: Utility Software>>Measurement & Automation ExplorerPrimary Software Version: 3.1 Primary Software Fixed Version: N/A Secondary Software: Driver Software>>NI-DAQ, Driver Software>>NI-DAQmx Hardware: Multifunction DAQ (MIO)>>Connector Blocks>>BNC-2110, Signal Sources (AWG/FG/AO)>>Analog Output Devices>>PXI-6731, Signal Sources (AWG/FG/AO)>>Analog Output Devices>>PCI-6733, Signal Sources (AWG/FG/AO)>>Analog Output Devices>>PCI-6703, Signal Sources (AWG/FG/AO)>>Analog Output Devices>>PCI-6713, Signal Sources (AWG/FG/AO)>>Analog Output Devices>>PXI-6722, Signal Sources (AWG/FG/AO)>>Analog Output Devices>>PXI-6733, Signal Sources (AWG/FG/AO)>>Analog Output Devices>>PXI-6713, Signal Sources (AWG/FG/AO)>>Analog Output Devices>>PXI-6703, Signal Sources (AWG/FG/AO)>>Analog Output Devices>>PCI-6723, Signal Sources (AWG/FG/AO)>>Analog Output Devices>>PCI-6711, Signal Sources (AWG/FG/AO)>>Analog Output Devices>>PXI-6711, Signal Sources (AWG/FG/AO)>>Analog Output Devices>>PCI-6722, Signal Sources (AWG/FG/AO)>>Analog Output Devices>>PCI-6731, Signal Sources (AWG/FG/AO)>>Analog Output Devices>>PXI-6723
Problem: When I try to configure my 671x or 673x analog output device to use the BNC-2110 as an accessory, Measurement & Automation Explorer (MAX) does not list the BNC-2110 as an option. What should I do? Solution: All of the devices in the 671x and 673x series of analog output devices incorrectly list the BNC-2111 as an accessory option. This is a typing error. To use your PCI-671x or 673x analog output device with the BNC-2110, select the BNC-2111 as the accessory. This properly configures your device to work with the BNC-2110. Related Links: Hardware Installation/Configuration Troubleshooter Attachments:
Report Date: 08/11/2003 Last Updated: 04/28/2005 Document ID: 30AC52QX |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
