This Document is not yet Rated

Rate this Document

When You Load LVM Files, Time Channels are No Longer Created.

Primary Software: DIAdem
Primary Software Version: 10.1
Primary Software Fixed Version: 10.1
Secondary Software: DIAdem

Problem: In previous DIAdem versions, time channels were created for the data channels when LVM files were loaded. DIAdem 10.1 does not create the time channels.

Solution:

When you load LVM files, you now generate waveform channels. Therefore, the additional time channels that were created in previous versions are no longer necessary and are not generated.

Whether DIAdem creates the data as waveform channels (new process) when it loads LVM files, or creates data channels with an additional time channel (old process), depends on the installed DataPlugin. DIAdem 10.1 provides the DataPlugin file for both processes. In standard DIAdem installations, these DataPlugin files are saved in the following folder: "C:\Programs\National Instruments\Shared\Usi\bin\".

The "uspLVM.uri" file supports the new process, and the "uspLVM_TimeChannels.uri" file supports the old process. If you double-click one of these files, you can install the selected DataPlugin and specify which process DIAdem uses to load LVM files.

Refer to the DIAdem help under "Channel Types in DIAdem" for more information about waveform channels, and under "DataPlugin: General Information" for more information about DataPlugins.

Related Links:

Attachments:





Report Date: 10/24/2006
Last Updated: 01/09/2007
Document ID: 42N6CMFN

Your Feedback!	Poor  |  Excellent							Yes	No
Document Quality?							Answered Your Question?
	1	2	3	4	5
Document needs work? Please tell us why.
Please Contact NI for all product and support inquiries.