This Document is not yet Rated

Rate this Document

"No Drivers Available" Message When Calibrating Counters on DAQ Cards

Primary Software: Calibration Executive
Primary Software Version: 3.1
Primary Software Fixed Version: N/A
Secondary Software: N/A

Problem:
I am using Calibration Executive to calibrate the counters my DAQ board. The calibrator and DMM are found, but not the counter and a "No Drivers Available" message appears.


Solution:
This message is an expected behavior. It is indicating that Calibration Executive does not currently have driver support for external counters. Calibration Executive communicates with the external DMM, calibrator, and counters through a GPIB bus. Currently there is only GPIB driver support for the DMM and calibrator in Calibration Executive.

It will be necessary to manually take the reading from your counter and enter it into Calibration Executive. Calibration of counters requires only one reading.


Related Links:
Product Manuals: Calibration Executive Help (December 2006)


Attachments:





Report Date: 11/28/2005
Last Updated: 02/20/2007
Document ID: 3RRIS5MO

Your Feedback!	Poor  |  Excellent							Yes	No
Document Quality?							Answered Your Question?
	1	2	3	4	5
Document needs work? Please tell us why.
Please Contact NI for all product and support inquiries.