Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI
1 ratings:
 3 out of 5     Rate this Document

How can I configure/change the widths of copper traces in Ultiboard?

Primary Software: Electronics Workbench>>Ultiboard
Primary Software Version: 9.x
Primary Software Fixed Version: N/A
Secondary Software: Electronics Workbench>>Ultiroute

Problem: How can I configure/change the widths of copper traces in Ultiboard?

Solution: The easiest way to alter trace properties is via the spreadsheet view in Ultiboard.
  1. If you cannot see the spreadsheet view select View >> Spreadsheet View
  2. Select the Nets tab in the Spreadsheet View
  3. Select a net in the Spreadsheet View (notice the entire row is now highlighted)
  4. Left-click in the Trace Width column of the highlighted row
  5. The selected column now appears as a drop down box. Enter a new trace width

Note: To select multiple rows in the Spreadsheet View you can hold down the CTRL key while selecting rows with the mouse. Similarly, holding down the Shift key allows selection of continuous rows in the Spreadsheet View. Changes now made to the trace width of one of the selected rows (as discussed in the steps above) will now cascade to the multiple rows selected.

Related Links:

Attachments:





Report Date: 10/11/2006
Last Updated: 10/11/2006
Document ID: 42AE0DDK

Your Feedback! poor Poor  |  Excellent excellent   Yes No
 Document Quality? 
 Answered Your Question? 
  1 2 3 4 5
Please Contact NI for all product and support inquiries.submit