What Cable Should I Use With my DIO Board and MIO Board When Connected to the SCB-100? Hardware: Legacy DAQ Devices>>Digital I/O>>PC-DIO-96, Digital I/O (DIO)>>Static>>PXI-6508, Digital I/O (DIO)>>Isolated>>PCI-6527, Digital I/O (DIO)>>Isolated>>PXI-6527, Digital I/O (DIO)>>Static>>DAQPad-6508 for USB
Problem: What Cable Should I Use With my DIO Board and MIO Board When Connected to the SCB-100? Solution: There is a general tendency to use an SH100-100 cable for both the DIO and MIO board. But this cable is intended to be used with the MIO board. The SH100-100 shorts some of the lines together which are common grounds on the MIO boards. However, on DIO boards they are not common grounds; in fact some of them are channels. So, the SH100-100 is not compatible with the DIO boards. Instead, you must use the SH100-100F cable with the DIO boards. The following boards need the SH100-100-F cable: PCI-6527, PXI-6527, PCI-DIO-96, PXI-6508, or DAQPad-6508. SH100-100-F is the same cable used for the Flex Motion boards. Related Links: Products and Services: SH100-100F Shielded Cable Attachments:
Report Date: 09/18/2002 Last Updated: 04/06/2005 Document ID: 2PHGGSBG |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
