Academic Company Events Community Support Solutions Products & Services Contact NI MyNI
8 ratings:
 4.5 out of 5   

Archived: Error 3005 with the LabVIEW Report Generation Toolkit for Microsoft Office

This document has been archived and is no longer updated by National Instruments



Primary Software:
Primary Software Version: 1.0.1
Primary Software Fixed Version: N/A
Secondary Software:

Problem: I get the message "Error 3005 occurred at Object specified is not creatable in Font Style VI->Set Report Font VI" when I try to run a VI that contains the Set Report Font VI. This happens after I upgrade to the LabVIEW Report Generation Toolkit for Microsoft Office 1.0.1 and use a Standard Report.

Solution: There is an Automation Open where an Automation Close (LabVIEW 6.1 and earlier) or Close Reference (LabVIEW 7.0 and later) should be. To correct this, please follow these steps:

  1. Go to the block diagram of Set Report Font VI.
  2. Double-click on Font Style VI.
  3. Switch to the block diagram of Font Style VI.
  4. Right-click on the Automation Open VI.
  5. Select "Replace" and choose Communication » ActiveX » Automation Close (LabVIEW 6.1 and earlier) or Communication » ActiveX » Close Reference (LabVIEW 7.0 and later).
  6. Save Font Style VI by choosing File » Save.


Related Links:

Attachments:





Report Date: 02/14/2002
Last Updated: 02/26/2004
Document ID: 2IDB7OLD

Your Feedback! poor Poor  |  Excellent excellent   Yes No
 Document Quality? 
 Answered Your Question? 
  1 2 3 4 5
Please Contact NI for all product and support inquiries.submit