Time out on pre-triggger operation in LV on a legacy AT-MIO-16.Hardware: Legacy DAQ Devices>>Multifunction DAQ>>AT-MIO-16
Problem: What pin do I connect my digital trigger to on a legacy AT-MIO-16 board? Solution: When using a digital trigger on a legacy AT-MIO-16 board you need to connect the trigger to the 'Start Trig' pin of the board if the operation has no pre trigger scans. When using pre trigger scans (>0) the trigger should be connected to the 'Stop Trig' pin on the I/ O connector. Related Links: Attachments:
Report Date: 06/16/1995 Last Updated: 06/30/2004 Document ID: 0AF8G31J |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
