Why Do I Receive the Error -10608 When Using the PCI-6711? Hardware: Signal Sources (AWG/FG/AO)>>Analog Output Devices>>PCI-6711
Problem: While doing double-buffered waveform generation using the PCI-6711, I get the error -10608 saying that no transfer is in progress. Why? Solution: One of the possible causes of this error is a high update rate. The update rate might be high enough that you are not allowing enough time to fill the buffer with new data. This error can also be the result of having the regeneration option, within software, set to OFF. If you turn the regeneration option to ON, the error will go away. You can also reduce the update rate to see at which point you stop getting the error -10608. The link below provides other causes of error -10608. Related Links: KnowledgeBase 0EIAN3BS. Acquire & Process N Scans.vi Example Returns Error -10608 In LabVIEW 4.0 Attachments:
Report Date: 12/10/2002 Last Updated: 07/23/2003 Document ID: 2S9D4L2O |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
