1 ratings:

5 out of 5

Rate this Document

Lab-PC+ Not Responding to Selected Base Address

Hardware: Legacy DAQ Devices>>Multifunction DAQ>>Lab-PC+

Problem:
When I perform Test Resources on my Lab-PC+ in Measurement & Automation Explorer, I receive the following error: This device is not responding to selected base address. I have tried setting the dip switches for several different unused base addresses as well as tried the board in different slots and another computer. Why is this happening?

Solution:
It is possible that the fuse on your board is blown. The figure below shows the location of the fuse on the board.

You can also find the location of the fuse in the user manual linked below. There is also a spare fuse attached to your board that can be used as a replacement.

Related Links:
Product Manuals: Lab-PC+ User Manual (June 1996)

Attachments:





Report Date: 11/12/2004
Last Updated: 04/20/2009
Document ID: 3FB7QC6K

Your Feedback!	Poor  |  Excellent							Yes	No
Document Quality?							Answered Your Question?
	1	2	3	4	5
Document needs work? Please tell us why.
Please Contact NI for all product and support inquiries.