1 ratings:

5 out of 5

Rate this Document

Programmatically Setting the NI 9205/9206 Voltage Range

Primary Software: LabVIEW Modules>>FPGA Module
Primary Software Version: 1.0
Primary Software Fixed Version: N/A
Secondary Software: N/A
Hardware: CompactDAQ>>Analog Input Modules>>NI 9205

Problem:
I want to be able to programmatically set the voltage range on each of my analog inputs on the NI 9205/9206 independently. How do I set these ranges?

Solution:
If you want to be able to dynamically set the voltage ranges of each of your analog inputs on the NI 9205/9206, while the FPGA is running, you need to use an FPGA I/O Method Node. Follow these steps to accomplish this:

1. Place an FPGA I/O Method Node on your FPGA VI block diagram
2. Right-click on the node and click on Select Item»[ Module Name ]
   
   
   
   Note: You must select the entire module not the specific analog inputs
   
   
3. Click on the method text of the node and select Set Voltage Range
   
   
   
   
4. In order to identify the different voltage ranges supported for the NI 9205, right-click on the Voltage Range input of the method node and create a constant>
   
   
   

You will only be able to set the voltage range for modules that have programmable input ranges.

Related Links:
Product Manuals: NI 9206 Operating Instructions and Specifications
Product Manuals: NI 9205 Operating Instructions and Specifications
KnowledgeBase 43GFD8LX: Voltage Readings with NI-9205 or NI-9206 are off by Several Millivolts

Attachments:





Report Date: 06/20/2008
Last Updated: 05/01/2009
Document ID: 4MJ7Q2KG

Your Feedback!	Poor  |  Excellent							Yes	No
Document Quality?							Answered Your Question?
	1	2	3	4	5
Document needs work? Please tell us why.
Please Contact NI for all product and support inquiries.