Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI
1 rating:
 1 out of 5     Rate this Document

How Can I View a Saved Waveform Using VirtualBench Scope?

Primary Software: Other NI Software>>VirtualBench
Primary Software Version: 2.6
Primary Software Fixed Version: N/A
Secondary Software:

Problem: How can I view a saved waveform using VirtualBench Scope?

Solution: VirtualBench Scope stores its datafiles as tab-delimited data in columns. Following are instructions on viewing a saved VirtualBench Scope waveform:


  1. Choose File » Load Waveform.
  2. When prompted for the file settings, leave everything as default (unless you are loading a non-VirtualBench Scope waveform file) and select the Copy to location (Ref1 or Ref2).
  3. You should see the correct waveform in the preview pane. If you do not see the waveform, then one of the settings is not correct (for example, delimiter should be commas instead of tabs).
  4. After the waveform is loaded, you may not see it in the display pane of VirtualBench Scope.
  5. Adjust the Volts/Division, Vertical Position, and Timebase to find your data.
  6. Adjusting the scrollbar (left-click on the left edge of the scrollbar to increase its size...thus increasing the timebase) can also help resolve your data.


Related Links: KnowledgeBase 17CC4D2I: How Do I Adjust the Channel Gain on VirtualBench-Scope

Attachments:





Report Date: 01/19/2001
Last Updated: 02/14/2002
Document ID: 25IBRKR4

Your Feedback! poor Poor  |  Excellent excellent   Yes No
 Document Quality? 
 Answered Your Question? 
  1 2 3 4 5
Please Contact NI for all product and support inquiries.submit