This Document is not yet Rated

LabVIEW Real-Time Execution Trace Toolkit 2.0.1 Readme

Primary Software: LabVIEW Modules>>Real-Time Module
Primary Software Version: 5.0
Primary Software Fixed Version: N/A
Secondary Software: N/A

Problem: I have not installed the Real-Time Execution Trace Toolkit. Can I still access the readme files?

Solution:

The Real-Time Execution Trace Toolkit 2.0.1 readme file is attached below and also installs with the toolkit.

System Requirements

LabVIEW Real-Time Module or LabWindows^TM/CVI^TM Real-Time Module

Installation Instructions

Complete the following steps to install the Real-Time Execution Trace Toolkit. Installing the Real-Time Execution Trace Toolkit 2.0.1 removes any existing previous versions of the LabVIEW Execution Trace Toolkit.

Insert the CD that contains the Real-Time Execution Trace Toolkit.
Run the setup.exe program.
Follow the instructions that appear on the screen.

New Flags

The Execution Trace Toolkit 2.0.1 includes the following new event flags.

NI Scan Engine
- Scan Period
- Mode Change
- Fault Added
- Fault Cleared

Accessing the Help from LabVIEW

Refer to the LabVIEW Help, accessible by selecting Help»Search the LabVIEW Help from the pull-down menu in LabVIEW, for information about the Execution Trace Toolkit VIs.

Accessing the Help from LabWindows/CVI

Refer to the LabWindows/CVI Help, accessible by selecting Help»Contents in LabWindows/CVI, for information about using the Real-Time Execution Trace Toolkit in LabWindows/CVI.

Finding Examples in LabVIEW

LabVIEW examples for the Real-Time Execution Trace Toolkit are located in the labview\examples\tracetool\ folder. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.

You also can find example VIs using the NI Example Finder. Select Help»Find Examples to launch the NI Example Finder. You also can click the arrow on the Open button on the LabVIEW dialog box and select Examples from the shortcut menu to launch the NI Example Finder.

Use the Browse or Search page of the NI Example Finder to find an example VI. In the Browse page, the Real-Time Execution Trace Toolkit examples are located in the Toolkits and Modules»Execution Trace Toolkit folder.

Finding Examples in LabWindows/CVI

You can find example programs using the NI Example Finder. Select Help»Find Examples in LabWindows/CVI to launch the NI Example Finder.

Known Issue

The Real-Time Execution Trace Toolkit 2.0.1 includes the following known issue at the time of release. Refer to the National Instruments Web site for a complete, up-to-date listing of known issues in the Real-Time Execution Trace Toolkit 2.0.1.

Events near the end of the trace may not be visible until zoomed in.

Copyright

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

Trademarks

National Instruments, NI, ni.com, LabVIEW, LabVIEW Real-Time Module, LabWindows/CVI Real-Time Module, and Real-Time Execution Trace Toolkit are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.

The mark LabWindows is used under a license from Microsoft Corporation.

Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your CD, or ni.com/patents.

Related Links:

Attachments:

Report Date: 06/03/2008
Last Updated: 08/25/2008
Document ID: 4M2HEMLC

Your Feedback!

Poor | Excellent

Yes

Document Quality?

Answered Your Question?

Please Contact NI for all product and support inquiries.