This Document is not yet Rated

Rate this Document

How Do I Connect Power and Ground to a Digital Component in Multisim?

Primary Software: Electronics Workbench>>Multisim
Primary Software Version: 10.0.1
Primary Software Fixed Version: N/A
Secondary Software: Electronics Workbench>>Multicap

Problem: When editing schematics in Multisim, the power and ground pins of digital ICs are not shown in the schematic symbol. How do I ensure these pins are connected to the appropriate nets?

Solution:

Digital components, even though they do not show the power and ground pins in the symbol (hidden pins), they are pre-configured to have the power and ground pins virtually connected to the schematic's global power and ground nets. As long as the nets exist somewhere else in the schematic, the IC power and ground pins will be connected.

You can check this behavior if you follow the next steps:

1. Place the digital component on the work area
2. Double-click the component to open the Properties dialog and select the Pins tab
3. Look under the Nets column for the power and ground nets
4. (Optional) Double-click the cell and you can modify the name to any desire net name
5. Click OK to close the Properties dialog

General tips for digital ICs:

• As long as the net name exists anywhere on the schematic, the digital component is virtually connected.
• By default, digital components are connected to VCC and GND or VSS and VDD, simply place the appropriate source symbol anywhere on the schematic to power up the IC. Select Place»Component, select Master Database, Sources Group and Power Sources Family. Locate the appropriate symbol in the Component field and place it in the work area.

Related Links:

Attachments:





Report Date: 06/30/2006
Last Updated: 04/22/2008
Document ID: 3YT91HMC

Your Feedback!	Poor  |  Excellent							Yes	No
Document Quality?							Answered Your Question?
	1	2	3	4	5
Document needs work? Please tell us why.
Please Contact NI for all product and support inquiries.