This Document is not yet Rated

Rate this Document

I Can Only See a Small Subset of My Image in Vision Builder

Primary Software: Vision Builder for Automated Inspection
Primary Software Version: 6.0
Primary Software Fixed Version: N/A
Secondary Software: N/A

Problem:
When I acquire an image through Vision Builder, I can only see a small portion of the image. In the Measurement and Automation Explorer (MAX), the image is displayed at the full resolution (ex. 640x480), but in Vision Builder the image shown is only 32x32 pixels.

Solution:
You probably have a Region of Interest (ROI) set in Vision Builder. To return to the full image, double-click on the subset, which should release the ROI. Then press the Acquire button again. The full image should appear.

If this does not return the full resolution image, close and relaunch Vision Builder. Make sure to save any open scripts or images that you want to keep. This should release any Regions of Interest that were previously set.

Related Links:
National Instruments Vision Software

Attachments:





Report Date: 09/23/2002
Last Updated: 07/09/2007
Document ID: 2PMFFS9D

Your Feedback!	Poor  |  Excellent							Yes	No
Document Quality?							Answered Your Question?
	1	2	3	4	5
Document needs work? Please tell us why.
Please Contact NI for all product and support inquiries.