My Jog Moves Velocity in Motion Assistant Does Not Reach the Max Velocity I Set Primary Software: Motion AssistantPrimary Software Version: 1.0.2 Primary Software Fixed Version: N/A Secondary Software:
Problem: I am using Motion Assistant and when I do a jog move the velocity set in the move constraints tab is not met. I have the slide control set to 100%. Solution: Motion Assistant calculates the velocity of the jog move by the velocity attribute under the Move Constraints tab, the slide control under the Step Status tab, and the number of axes selected in the Configure tab. The velocity is calculated by the max velocity that each axis could meet without exceeding the vector space velocity set by the velocity attribute in the Move Constraints tab. For example, if you set the velocity to 10,000 steps/s, the slide control to 100% and have the move configured for 3 axis, the velocity for the jog move will be 5750 steps/s. This is because if each axis were moving at 5750 steps/s the velocity for the vector space would be 10,000 steps/s. Related Links: Attachments:
Report Date: 09/11/2003 Last Updated: 10/17/2003 Document ID: 31AGEOA2 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
