Why Do I Get Error -89125?Hardware: Signal Sources (AWG/FG/AO)>>Arbitrary Waveform and Function Generators
Problem: When I try to access the trigger lines on my device, I get the following error. Error -89125 "Device not configured".Why does this error occur? Solution: This error usually occurs because of devices or cables that are not configured properly in Measurement and Automation Explorer (MAX). Please refer to the links below to configure hardware in Measurement and Automation Explorer correctly. If you are using a RTSI cable, it may not be created or configured properly in MAX. You will need to create a RTSI cable first and then add your devices to it. To create a RTSI cable in MAX, follow the instructions in the MAX help for NI-DAQmx. To get to the help in MAX, select Help » Help Topics » NI-DAQmx. Once in the help, search for RTSI. A "Configuring a RTSI Cable" topic should be first in the list. Related Links: KnowledgeBase 3BMC6S2G: Configuring Your PXI System in MAX 3.x and Above KnowledgeBase 41LE3IE1: How Do I Configure My SCXI Chassis for a Real Time Target in MAX? Attachments:
Report Date: 01/26/2007 Last Updated: 03/12/2007 Document ID: 45PH7Q9U |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
