10 rating:

1.80 out of 5

Rate this Document

Communicating with an Ethernet Controlled Instrument in LabVIEW

Primary Software: Instrument Drivers/IVI>>IVI Compliance Package
Primary Software Version: 2.0
Primary Software Fixed Version: N/A
Secondary Software: N/A

Problem:
Using LabVIEW, how do I read data from an instrument with an Ethernet connection?

Solution:
There are two ways to reference an Ethernet instrument in LabVIEW:

• Create a VISA resource constant.  The instrument reference is TCPIP::xxx.xxx.xxx.xxx::INSTR, where the x's refer to the instrument's IP address.  This method does not require configuration in Measurement & Automation Explorer (MAX).

• Create a new TCP/IP VISA resource in MAX.  Then reference the VISA Alias in LabVIEW instead of using the constant created in the previous step.  To setup the TCP/IP VISA resource, refer to the Ethernet Instrument Control Tutorial referenced below.

Related Links:
KnowledgeBase 2OTCMRBJ: How Do I Configure the IP Addess of my Ethernet Instrument?
Developer Zone Tutorial: Ethernet Instrument Control Tutorial
Developer Zone Tutorial: Understanding LAN/LXI for Instrument Control
Developer Zone: Instrument Driver Network

Attachments:





Report Date: 02/18/2003
Last Updated: 05/12/2008
Document ID: 2UH3QKH6

Your Feedback!	Poor  |  Excellent							Yes	No
Document Quality?							Answered Your Question?
	1	2	3	4	5
Document needs work? Please tell us why.
Please Contact NI for all product and support inquiries.