This Document is not yet Rated

Rate this Document

Using Motion Assistant 1.x Code Generation with the PCI-7390

Primary Software: Motion Assistant
Primary Software Version: 1.1
Primary Software Fixed Version: N/A
Secondary Software: N/A

Problem:
When adding digital output to your steps in the NI Motion Assistant, the code generation uses the wrong port ID values.

Solution:
To correct this problem, change the port ID specified in your generated code to the following:

Port	LabVIEW Code	C Code
Port 1	0x81 (129)	NIMC_DIGITAL_OURPUT_PORT1
Port 2	0x82 (130)	NIMC_DIGITAL_OURPUT_PORT2
Port 3	0x83 (131)	NIMC_DIGITAL_OURPUT_PORT3
Port 4	0x84 (132)	NIMC_DIGITAL_OURPUT_PORT4

Related Links:
KnowledgeBase 3H3FPVKD : Troubleshooting the Licensing and Activation of Motion Assistant
Current Software: Motion Control


Attachments:





Report Date: 11/03/2005
Last Updated: 04/13/2006
Document ID: 3R2HNPFL

Your Feedback!	Poor  |  Excellent							Yes	No
Document Quality?							Answered Your Question?
	1	2	3	4	5
Document needs work? Please tell us why.
Please Contact NI for all product and support inquiries.