Why Do My IMAQ IO Functions Not Work In LabVIEW 8.0?Primary Software: Driver Software>>Vision Acquisition SoftwarePrimary Software Version: 8.0 Primary Software Fixed Version: N/A Secondary Software: N/A Hardware: Image Acquisition (IMAQ)>>Compact Vision System, Image Acquisition (IMAQ)>>Digital Image Devices>>PCI-8252 with Vision Acquisition Software
Problem: I have installed all the necessary software (NI IMAQ for 1394, LabVIEW RT, NI IMAQ) to be able to download my IMAQ code to my Compact Vision System (CVS). However, when I include IMAQ IO VIs in my program, I am not able to download and run it on the remote target. Solution: You will need to download and install the driver linked below in order for IMAQ IO VIs to work in LabVIEW 8.0. After downloading, unzip the file to a known location and run the setup.bat batch file. Note: The above information is only valid for LabVIEW 8.0. As of LabVIEW 8.20, the Vision Acquisition Software bundle is sufficient. Related Links: Download IMAQ IO upgrade driver here Attachments:
Report Date: 12/21/2005 Last Updated: 01/23/2008 Document ID: 3SKF5T5L |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
