This Document is not yet Rated

Rate this Document

Using TestStand 3.1 with NI Requirements Gateway

Primary Software: NI Requirements Gateway
Primary Software Version: N/A
Primary Software Fixed Version: N/A
Secondary Software: TestStand

Problem:
I am trying to use the NI Requirements Gateway with TestStand 3.1. When I try to open the TestStand Example, I am unable to read the TestStand documents and get the following error:

Error: The file 'C:\Program Files\National Instruments\Requirements Gateway 1.0\examples\TestStand\TestStand Example.tsw' was saved in TestStand 3.5.0.725 and is incompatible with TestStand 3.1.0.9095. 'OpenWorkspaceFile'.

Is there an example that works with TestStand 3.1?

Solution:
Below is an example that will work when using TestStand 3.1 with NI Requirements Gateway.  Unzip the folder to your hard drive, and then open the workspace file.  Once the workspace file is open, you should be able to run the computer_31 sequence.

Related Links:

Attachments:


- Requirements_Gateway_Example-TS_31.zip



Report Date: 06/13/2006
Last Updated: 10/02/2007
Document ID: 3YC8JOHY

Your Feedback!	Poor  |  Excellent							Yes	No
Document Quality?							Answered Your Question?
	1	2	3	4	5
Document needs work? Please tell us why.
Please Contact NI for all product and support inquiries.