This Document is not yet Rated

Rate this Document

A/V Extender Card Jumper Settings for Micron Sensors on the Blackfin 537 EZ-KIT

Primary Software: LabVIEW Modules>>Embedded Module for Blackfin Processors
Primary Software Version: N/A
Primary Software Fixed Version: N/A
Secondary Software: N/A

Problem:
What jumper settings are required with the A/V Extender card for a Micron sensor on the Blackfin EZ-KIT?


Solution:
Attached is a PDF document that shows the A/V Extender card jumper settings for the Micron sensor. This card can be connected to the EZ-KIT to use the Micron camera sensor VIs on the Blackfin palette.  Make sure to also set SW2 on the camera to 13.5 and SW4 on the BF537 EZ-KIT to On-On-On-Off.


Related Links:

Attachments:

A_V Extender Micron Jumpers.pdf




Report Date: 08/01/2007
Last Updated: 08/01/2007
Document ID: 4C08RO0L

Your Feedback!	Poor  |  Excellent							Yes	No
Document Quality?							Answered Your Question?
	1	2	3	4	5
Document needs work? Please tell us why.
Please Contact NI for all product and support inquiries.