This Document is not yet Rated

Rate this Document

NI ELVIS Arbitrary Waveform Generator Express VI Does not Output a Signal From the Express Front Panel

Primary Software: Driver Software>>NI ELVIS Driver VIs
Primary Software Version: 2.1
Primary Software Fixed Version: N/A
Secondary Software: N/A
Hardware: Multifunction DAQ (MIO)>>Connector Blocks>>NI ELVIS

Problem:
Why does nothing happen when I open the Arbitrary Waveform Generator (ARB) Express VI's Front Panel and select run?

Solution:
The ARB Express VI Front Panel does not output a signal. To generate a waveform using the ARB Express VI you must wire a signal into at least one of the DAC Signal In terminals. You can use the Simulate Signal Express VI to create a waveform, load a signal from a file, or get the signal from another source.

Related Links:

Attachments:





Report Date: 05/05/2006
Last Updated: 05/12/2006
Document ID: 3X4GKQX6

Your Feedback!	Poor  |  Excellent							Yes	No
Document Quality?							Answered Your Question?
	1	2	3	4	5
Document needs work? Please tell us why.
Please Contact NI for all product and support inquiries.