What does the Phase in the FGEN Soft Front Panel Relate to?Hardware: Signal Sources (AWG/FG/AO)
Problem: I see knob to set the phase for a periodic waveform in the NI-FGEN Soft Front Panel, but what is this phase relative to? Solution: The phase dial in the Soft Front Panel is similar to the Start Phase of the NI-FGEN API. This property controls horizontal offset of the standard waveform the signal generator will produce. You specify this property in degrees of one waveform cycle. A start phase of 180 degrees means output generation begins halfway through the waveform. A start phase of 360 degrees offsets the output by an entire waveform cycle, which is identical to a start phase of 0 degrees. Related Links: Product and Services: Signal Generators Attachments:  scope.png
Report Date: 11/03/2008 Last Updated: 11/05/2008 Document ID: 4R2ISISL |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
