LabVIEW 2012 SP1补丁详细信息
主要软件: LabVIEW Development Systems>>LabVIEW Base Development System
主要软件版本: 2012 SP1
主要软件修正版本: 2012 SP1
次要软件: N/A
问题: LabVIEW 2012 SP1 f5补丁修复了哪些问题?
解答: LabVIEW 2012 SP1 f5补丁适用于Windows操作系统上安装的LabVIEW 2012 SP1(32位)和LabVIEW 2012 SP1运行引擎(32位)。
LabVIEW 2012 SP1 f3补丁适用于所有支持的操作系统上安装的LabVIEW 2012 SP1和LabVIEW 2012 SP1运行引擎。
这些补丁修复了以下列表中的问题。NI强烈建议所有安装了LabVIEW 2012 SP1的用户都安装该补丁。
注:如通过NI更新服务升级至LabVIEW 2012 SP1,将自动安装LabVIEW 2012 SP1 f5。如需手动安装补丁,请参考下面的“驱动和更新”链接。
LabVIEW 2012 SP1 f5补丁修复的问题
ID |
说明信息 |
416146 |
Intermittent crashes or hangs can occur when two threads try to access the same resource at the same time. |
360229 |
Class VI ,with source only turned on, loaded before a property accessor for a dynamic property it uses is broken on load. |
369472 |
Polymorphic VIs lose their icons when built into packed libraries. |
381638 |
Waveform chart X-Axis scales incorrectly when Plot Area scrolls for new data in LabVIEW 2012. |
404983 |
Dynamic load of LabVIEW Class fails when built into a DLL. |
423373 |
Under certain conditions, a compiler optimization will cause array shift registers to share memory space. |
LabVIEW 2012 SP1 f4补丁修复的问题
ID |
说明信息 |
409185 |
TestStand operator interfaces with VIs that run in the LabVIEW 2012 SP1 f3 Run-Time Engine are slow to quit.
|
407860 |
DVR Bad Reference Error when DVRs are being created/destroyed in parallel from different VI hierarchies. |
408844 |
Memory growth observed when using Asynchronous Call By Reference node in long running loop. |
408845 |
Measurement speed can degrade when using Asynchronous Call By Reference node in long running loop. |
LabVIEW 2012 SP1 f3补丁修复的问题
ID |
说明信息 |
396984 |
Sequential For Loop structures will sometimes execute incorrectly when the VI property "Allow Debugging" is unchecked in LabVIEW 2012.
|
390386 |
LabVIEW HTTP Client does not implement Curl Rewind causing authentication errors for auth-basic. |
384576 |
NI SSL Libraries are not installed for the LabVIEW Run-Time Engine on Mac OS X. |
381193 |
Application Builder Additional Installer section lists LabVIEW Run-Time Engine 2012 SP1 (64-bit) without the "SP1". |
LabVIEW 2012 SP1 f2补丁修复的问题
ID |
说明信息 |
397249 |
The LabVIEW 2012 SP1 f1 Patch breaks the Update VI Tool in TestStand and can cause existing LabVIEW steps in TestStand to throw an error.
|
LabVIEW 2012 SP1 f1补丁修复的问题
ID |
说明信息 |
389295 |
LabVIEW 2012 SP1 breaks custom prototypes in DLLs that contain LabVIEW classes. |
381193 |
The Render to Image method for 3D picture controls demonstrates slow performance, which can impact the update rates of 3D picture controls.
|
相关链接:
驱动和更新:用于Windows操作系统的LabVIEW 2012 SP1(32位)f5补丁 驱动和更新:用于Windows操作系统的LabVIEW 2012 SP1(64位)f5补丁 驱动和更新:用于Mac OS X操作系统的LabVIEW 2012 SP1 f5补丁 驱动和更新:用于Linux操作系统的LabVIEW 2012 SP1 f5补丁
附件:
报告日期: 02/26/2013
最近更新: 10/08/2013
文档编号: 66EDKHLF
Other Support Options
Ask the NI Community
Collaborate with other users in our discussion forums
Request Support from an Engineer
A valid service agreement may be required, and support options vary by country.