NI TDM Excel Add-In 2.0.1 does not work with Microsoft Excel 2007
Primary Software: Other NI Software
Primary Software Version: N/A
Primary Software Fixed Version: N/A
Secondary Software: LabVIEW Development Systems
Problem: After installing a prior version of DIAdem over an existing version DIAdem (for example 11.0), the buttons for importing TDM data in Excel 2007 do not react.
Solution: The Excel Add-In has to be reset. In order to do so you must de-activate the NI TDM Add-In, remove the Custom Tool Bar.
In order to do so follow the following steps:
- Start Excel 2007
- Right-click on one of the NI TDM Add-In toolbar icons and select Delete Custom Toolbar
- Right-click one of the tabs and select Customize Quick Access Toolbar
- On the left side, navigate to Add-Ins and From the drop-down field on the bottom of the right side, select COM-Add-Ins
- Click Go...
- Uncheck National Instruments TDM Importer for MS Excel
- Confirm by clicking OK
- Repeat steps 3 to 5
- Check National Instruments TDM Importer for MS Excel
- Confirm by clicking OK
Note: If, after completing these steps, the buttons still do not work, repeat steps 1 through 7, then uninstall then reinstall the NI TDM Add-in using Add/Remove Programs. This should create new reference to all the needed components for the NI TDM Add-in to work in Excel 2007.
Related Links: Developer Zone User Guide: TDM Excel Add-In Tool for Microsoft Excel
Attachments:
Report Date: 02/16/2009
Last Updated: 12/04/2009
Document ID: 4UFA5DN5
