How Can I Do Self Calibration in LabVIEW for Legacy Signal Generators (5401, 5411, 5431)? Hardware: Signal Sources (AWG/FG/AO), Signal Sources (AWG/FG/AO)>>Arbitrary Waveform and Function Generators
Problem: I notice that the niFgen Self Cal.vi will do self calibration for all later NI Signal Generators (5421, 5422, etc). How can I do the same self calibration procedure for legacy signal generators (5401, 5411, 5431)? Solution: The niHSSources Cal Self Calibrate.vi is the legacy equivalent of the niFgen Self Cal.vi. The reason for separate VI's is because in both instances, the niFgen driver sits on an underlying DAQ driver. The DAQ driver for the 5401, 5411, and 5431 is the legacy DAQ driver, while later signal generators are built upon the newer DAQmx driver architecture. Related Links: National Instruments Signal Generators External Calibration resources KnowledgeBase 3U27QK2W: What Are The Differences Between Self-Calibration and External Calibration? Attachments:
Report Date: 05/02/2006 Last Updated: 01/07/2008 Document ID: 3X1I41OY |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
