Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI
1 ratings:
 4 out of 5     Rate this Document

Enabling Dithering on a Lab or 1200 Series Device

Primary Software: Driver Software>>NI-DAQ
Primary Software Version: 6.9.3
Primary Software Fixed Version: N/A
Secondary Software: N/A
Hardware: Legacy DAQ Devices>>Multifunction DAQ>>Lab-NB, Legacy DAQ Devices>>Multifunction DAQ>>PCI-1200, Legacy DAQ Devices>>Multifunction DAQ>>Lab-PC-1200AI, Legacy DAQ Devices>>Multifunction DAQ>>Lab-PC+, Legacy DAQ Devices>>Multifunction DAQ>>Lab-SE, Legacy DAQ Devices>>Multifunction DAQ>>Lab-PC, Legacy DAQ Devices>>Multifunction DAQ>>Lab-PC-1200, Legacy DAQ Devices>>Multifunction DAQ>>Lab-LC

Problem: How do I enable dithering on my Lab or 1200 Series device?

Solution: If you are programming with the NI-DAQ API, use the MIO_Config function. If you are programming with LabVIEW, use the MIO Configure VI. This function (or VI) enables dithering on the Lab and 1200 Series devices (except the Lab-PC+). Refer to the NI-DAQ Function Reference Help or the LabVIEW Help for more information about using this function or VI, respectively.

Related Links:

Attachments:





Report Date: 01/30/1998
Last Updated: 06/23/2004
Document ID: 15TF67VK

Your Feedback! poor Poor  |  Excellent excellent   Yes No
 Document Quality? 
 Answered Your Question? 
  1 2 3 4 5
Please Contact NI for all product and support inquiries.submit