This Document is not yet Rated

Rate this Document

Time-out Error With 6B Example For Measure

Primary Software: Other NI Software>>Measure
Primary Software Version: 2.0
Primary Software Fixed Version: N/A
Secondary Software: N/A

Problem: When I open Excel and run the 6B example that ships with Measure, I get a time-out error. Why?

Solution: There are two things you must verify before running this example:

1. The COM port--By default, the example uses COM1. If your 6B modules are connected to a different COM port, go to the Serial Menu, select "Instrument", and change the COM port to the right one.
   
2. The address of the module--By default, the example uses address 00. Make sure you change it to the correct address (that you configured) for the module. Remember that Measure requires a 2 byte address, so if your module address is 5, make sure you specify "05".

Related Links: KnowledgeBase 0DCGGROQ: General Information about Analog Devices 6B Backplanes
Measure Support


Attachments:





Report Date: 12/08/2000
Last Updated: 12/02/2004
Document ID: 247CRHDM

Your Feedback!	Poor  |  Excellent							Yes	No
Document Quality?							Answered Your Question?
	1	2	3	4	5
Document needs work? Please tell us why.
Please Contact NI for all product and support inquiries.