5 ratings:

4.20 out of 5

Rate this Document

What Can I Do If My Blackfin Processor Status Window Is Not Displayed?

Primary Software: LabVIEW Modules>>Embedded Module for Blackfin Processors
Primary Software Version: 1.0
Primary Software Fixed Version: N/A
Secondary Software: N/A

Problem: I am using the LabVIEW Embedded Module for Blackfin Processors, and I am attempting to view the processor status using the Blackfin Processor Status Window. However, when I choose Target>>Processor Status from the Embedded Project Manager, nothing appears. What could be wrong?

Solution: In some situations, if LabVIEW unexpectedly quits while the processor status window is active, unreasonable values for window position can be saved. Thus, the next time you launch the window, it's coordinates can be off of the visible screen. To correct this, close the processor status window from the Windows taskbar by right-clicking and choosing Close. Then, open the VDspDebugSession.ini file located in the \..\National Instruments\LabVIEW 7.1 Embedded testday\vi.lib\LabVIEW Targets\Embedded\VDSP folder.

Change the values of the following keys to:

[Common]
StatusVisible=1
StatusPosition=0,0,500,250

Now, relaunch the Processor Status Window by choosing Target>>Processor Status from the Embedded Project Manager and it should appear properly in the upper left hand corner of the monitor.


Related Links:

Attachments:





Report Date: 04/19/2006
Last Updated: 04/19/2006
Document ID: 3WIAEKHD

Your Feedback!	Poor  |  Excellent							Yes	No
Document Quality?							Answered Your Question?
	1	2	3	4	5
Document needs work? Please tell us why.
Please Contact NI for all product and support inquiries.