2 ratings:

3 out of 5

Rate this Document

Connecting the DAQPad-6016 or 6015 with Calibration Executive

Primary Software: Calibration Executive
Primary Software Version: 3.1
Primary Software Fixed Version: N/A
Secondary Software: N/A
Hardware: Multifunction DAQ (MIO)>>Basic>>DAQPad-6015 for USB

Problem: I am trying to connect the DAQPad-6016/15 for Calibration Executive. What connections do I need to make?

Solution: Complete the following steps to connect the DAQPad-6016/15 to the calibrator, DMM, and counter through the E/M/S Series calibration hardware adapter:

1. Remove the cover of the DAQPad-6016/15 to expose the two 50-pin connectors.The 6015 only contains 1 50-pin connector.
2. Using an SH6850 shielded cable, connect the J7 connector on the DAQPad-6016 to the adapter.
3. Connect the adapter to the calibrator, DMM, and counter as described in the Calibration Executive software.


Related Links: Calibration Executive Website

Attachments:





Report Date: 03/30/2006
Last Updated: 10/13/2006
Document ID: 3VTA8AOR

Your Feedback!	Poor  |  Excellent							Yes	No
Document Quality?							Answered Your Question?
	1	2	3	4	5
Document needs work? Please tell us why.
Please Contact NI for all product and support inquiries.