Error -200077 when Using Change Detection with NI-USB 6525Primary Software: Driver Software>>NI-DAQmxPrimary Software Version: 7.0 Primary Software Fixed Version: N/A Secondary Software: N/A Hardware: Multifunction DAQ (MIO)>>Portable>>USB-6525
Problem: My USB-6525 manual says that I should be able to do change detection, however, when I set my sample clock mode to Change Detection, I get Error -200077 occurred at DAQ Assistant. Can't I do change detection with my USB 6525?   Solution: Change detection for the USB-6525 is newly supported in DAQmx driver version 8.9. Check what version of the driver you have by opening Measurement & Automation Explorer and expanding the software tab. If you have any version of DAQmx prior to NI DAQmx 8.9, download and install version 8.9 from the link below. Related Links: Drivers and Updates: NI-DAQmx 8.9 KnowledgeBase 4MHF1RVG: What Changes Were Made in the Various Versions of NI-DAQ for Windows? Attachments:
Report Date: 05/05/2009 Last Updated: 11/04/2009 Document ID: 4X4H2744 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
