Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI
This Document is not yet Rated  Rate this Document

Where is the Installer Source Location Populated from when Building an Installer?

Primary Software: LabVIEW Toolkits>>Application Builder
Primary Software Version: 8.2.1
Primary Software Fixed Version: N/A
Secondary Software: N/A

Problem:
Where is the information for the Installer Source Location populated from for the Additional Installers tab within the properties of a new LabVIEW Installer?

Solution:
When selecting the National Instruments Installers to Include, the Installer Source Location field of the Additional Installers tab is populated with the file path of the last installer that updated that software. 



This location can be unexpected at times due to the fact that many of these support files are installed with various National Instruments software.  For example, the Real-Time Module will often be referenced by NI-VISA, NI-Serial, NI Measurement & Automation Explorer, and the NI Variable Engine.  This is because these files are updated with the Real-Time Module after the LabVIEW installation occurred.

Related Links:

Attachments:





Report Date: 10/25/2006
Last Updated: 01/18/2008
Document ID: 42OMBUQP

Your Feedback! poor Poor  |  Excellent excellent   Yes No
 Document Quality? 
 Answered Your Question? 
  1 2 3 4 5
Please Contact NI for all product and support inquiries.submit