1 ratings:

5 out of 5

Rate this Document

What Versions of Vision Builder for Automated Inspection and LabVIEW RT Can I Have on a CVS or Smart Camera at the Same Time?

Primary Software: Vision Builder for Automated Inspection
Primary Software Version: 3.0
Primary Software Fixed Version: N/A
Secondary Software: LabVIEW Modules>>Real-Time Module
Hardware: Image Acquisition (IMAQ)>>Compact Vision System

Problem:
Which versions of Vision Builder for Automated Inspection (VBAI) and LabVIEW Real-Time will work together on a Compact Vision System (CVS) or Smart Camera?

Solution:

There are specific versions of VBAI that will work only with specific versions of the LabVIEW Real-Time software on a real-time target.  The reason for this is that VBAI was created using the LabVIEW environment.  Because it was built into an executable, it requires a specific version of the LabVIEW Run-Time Engine.  Therefore, when you try to install VBAI and the LabVIEW Real-Time software onto the CVS or Smart Camera at the same time, it requires the version of the LabVIEW Run-Time that your specific VBAI version was built on.  Below is a table that describes the versions of VBAI and LabVIEW Real-Time that will work concurrently on the CVS or Smart Camera.

Vision Builder for Automated Inspection	LabVIEW Real-Time
2.6.1	7.1.x
3.0	8.0.x
3.5	8.5.x
3.6	8.5.x

Related Links:
Products and Services: Compact Vision Systems
Products and Services: NI Smart Cameras
Products and Services: NI Vision Builder for Automated Inspection

Attachments:





Report Date: 01/16/2006
Last Updated: 10/08/2008
Document ID: 3TFDIBGH

Your Feedback!	Poor  |  Excellent							Yes	No
Document Quality?							Answered Your Question?
	1	2	3	4	5
Document needs work? Please tell us why.
Please Contact NI for all product and support inquiries.