Getting Started with Your GPIB-ENET/100 and NI-488.2 for Solaris and Specifications
Edition Date:
February 2001
Part Number:
322989A-01
This manual contains instructions to help you install and configure
the National Instruments GPIB-ENET/100 and NI-488.2 for Solaris.
The NI-488.2 software included in this kit is intended for use with Sun
SPARCstations running Solaris 2.5.1 or higher.
This manual assumes that you are familiar with Solaris 2.x and with
Ethernet and Internet networks, and that you have super-user privilege. This
manual also assumes your computer is connected to an Ethernet network
and you have TCP/IP installed on your machine, which is required before
you can use the driver software for the GPIB-ENET/100.
View the document in Adobe Acrobat PDF format. (File size: 828 KB)
Right-click the link above and select Save Link/Target As to download the document to your computer.
