Getting Started with Your GPIB-ENET/100 and NI-488.2 for Windows 2000/NT and Specifications
Edition Date:
August 2000
Part Number:
322752A-01
This manual contains instructions to help you install and configure
the National Instruments GPIB-ENET/100 and NI-488.2 for
Windows 2000/NT. The NI-488.2 software included in this kit is
intended for use with Windows 2000 and Windows NT 4.0 with
Service Pack 4 or higher installed.
This manual assumes that you are already familiar with Windows 2000
or Windows NT and with TCP/IP networks, and that your computer
is connected to an Ethernet network. Before you can use the driver
software for the GPIB-ENET/100, your host must be configured with
TCP/IP protocols that conform to Windows sockets (WinSock) version 1.1
or higher.
View the document in Adobe Acrobat PDF format. (File size: 847 KB)
Right-click the link above and select Save Link/Target As to download the document to your computer.
